Your e-bike connector expert from design to delivery
This is how we manage your project
Your ebike connector requirements
The type of e-bike application is always the starting point of our project. This project can consist of one or a combination of the follwing options: customised connector, cable assembly, splitter and cable harness. Depending on your needs, we will translate your application’s requirements to e-bike connector or cable harness specifications.
E-bike connector drawing
We will proceed with the set-up of a 3D concept drawing and step files. These will enable you to assess whether the e-bike connector or cable harness fits into your E-bike or E-bike system design.
E-bike connector prototype & samples
Once the 3D drawing of your e-bike connector or cable harness is approved, the next step is the production of a prototype and samples in order to start testing. Based on the results of your tests, the prototype will be further finalized until you are ready to start production.
E-bike connector production & quality check
The production team at Higo will be fully briefed with a final drawing according to ISO 9001 quality procedures. After production, outgoing quality & electrical tests are performed before shipment to A&C Solutions. At arrival at A&C Solutions’ warehouse in Belgium, the incoming e-bike connectors will be checked and compared with the initial drawing. After approval, the goods are ready for shipment to you.
European stock management for JIT delivery
A&C Solutions manages your e-bike connector stock from our 1500m2 site in Belgium. We are able to ship recurring deliveries of your e-bike connectors and cable harnesses within 24 hours of your call-off. We also have a large stock of standard e-bike signal, battery and motor connectors directly available from our warehouse.
Our projects
Projects
Higo customised cabling project with Nijland Cycling
Reduced installation & maintenance time with customised cable harnesses
A&C Solutions developed a customised cable harness with Higo connectors for cargo bike manufacturer Nijland Cycling. Nijland wanted to interconnect all electrical systems on the e bike and supply them with power by a simple and quick installation. Discover how this project was managed.
Looking for a specific connector for your project?
